BridgeSec aggregates any mix of FTTH, LTE, Wi-Fi, and Ethernet links into a single private, encrypted network — and unifies all your sites on one shared LAN. Runs on standard MikroTik hardware at a fraction of MPLS or any other Vendor costs.
Software-defined WAN on standard MikroTik hardware. No proprietary boxes, no carrier lock-in, no on-site engineers required.
Use any compatible MikroTik router you already own, or order a pre-configured, custom-built box that's ready to plug in and power on.
Connect any mix of FTTH, Ethernet, Wi-Fi, LTE/SIM, or satellite uplinks. The platform detects and bonds every interface automatically.
All sites appear on one shared private LAN. Every packet is AES-256 encrypted. A zero-trust tunnel ties everything together with no manual config.
Manage traffic, inspect connected devices, enforce firewall rules, and analyse bandwidth — all from one web-based management platform.
Runs on commodity MikroTik hardware — dramatically cheaper than SD-WAN appliances, MPLS, or any other vendor.
Bond any mix of FTTH, Ethernet, Wi-Fi uplinks, and LTE/5G SIM cards simultaneously. Traffic is distributed across all links in real time — poor connections become one strong, stable pipe.
Every office, vehicle, or remote site on your account appears on one flat private network. No complex routing, no VPN tunnels to manage — devices just see each other.
AES-256 encryption on every packet, zero-trust architecture, and a built-in firewall that protects your network perimeter — all active by default, no configuration needed.
When any link drops, traffic instantly shifts to surviving connections. VoIP stays up, video doesn't stutter, ERP sessions don't time out.
Monitor link health, analyse traffic, manage firewall rules, and inspect every connected device across all sites — with optional lightweight agents installed on endpoints.
Bring your own compatible MikroTik router and configure it via the app, or order a pre-configured ready-made box. No proprietary hardware lock-in.
BridgeSec keeps your link alive when any single carrier fails — no manual intervention, no dropped sessions.
A direct comparison against MPLS, SD-WAN, and other companies on every dimension that matters.
| Capability | BridgeSec | MPLS | SD-WAN | Simple VPN |
|---|---|---|---|---|
| Link types supported | FTTH, ETH, Wi-Fi, LTE, SAT | Leased lines only | Broadband + MPLS | Single uplink |
| Multi-link aggregation | Up to 8 simultaneous | Not supported | Limited bonding | No |
| Shared private LAN | Built-in, zero config | Yes | Complex setup | No |
| End-to-end encryption | AES-256, always on | Optional add-on | Varies | Yes |
| Built-in firewall | Yes — all tiers | Separate appliance | Paid add-on | No |
| Device monitoring agents | Yes | No | Vendor-specific | No |
| Hardware cost | Commodity MikroTik | Carrier-provided, locked | Proprietary, expensive | Any router |
| Deployment time | Under 10 minutes | Weeks to months | Days to weeks | Hours |
| Relative monthly cost | Low | Very high | High | Low |
Bond available LTE SIMs and Wi-Fi uplinks on-site. POS, cameras, IoT sensors and project tools all on one private LAN — no fibre needed.
Aggregate multiple SIM cards per vehicle for always-on connectivity. Seamless handoffs between towers — no dropped sessions, no data gaps.
Rural clinics with unreliable 3G get EHR access, telehealth video, and specialist consultations — all over bonded LTE and satellite links.
Factory floors, warehouses, and mining sites on one private LAN with no single point of failure and sub-10ms latency for automation systems.
Replace expensive MPLS across dozens of stores with bonded broadband on MikroTik. New branch goes live in 45 minutes, not 6 weeks.
Pre-configured rapid-deploy kits. Each site live in under 12 minutes — aggregating any available LTE carriers and satellite for field hospitals and command posts.
From offshore rigs to desert mines — BridgeSec aggregates whatever signal exists and turns it into a secure, reliable network.
One flat cost per device. No hidden carrier surcharges, no per-device fees, no surprises.
For a single remote office or field location. Bring your own MikroTik and configure it via the app.
Full bonding for businesses that cannot afford a single minute of connectivity loss.
Tailored for large-scale multi-device deployments with custom SLA and compliance requirements.
Tell us about your setup — number of sites, current providers, main pain points. We'll come back with a concrete proposal within 2 business hours.
Hardware arrives pre-configured. Insert your SIMs, power on — your site is live on the private network before your engineer finishes their coffee.